Used for both normal and inverted nipples with 3.2 mm square head. The 90mm long stem enables work with deep aero rimsas well as with all the normal rims. The professional metal handle gives perfect grip.

Unior's universal spoke tension meter measures the spoke tension on any kind of spoke. The analog spoke tension meter arrives calibrated and ready to use. To use, simply press the handle, position the spoke between the two pins and release the handle. The properly designed gauge is easy to read. Measured value, needs to be checked in the spoke information table, from where you read the actual tension, based upon the spoke specification. The printed table is included with the tool, together with more precise usage instructions. Additional included feature on the tool is also a spoke thickness gauge, which helps with the whole process. Simply insert the spoke in one of the upper openings and read the spoken thickness value.

The true checking tool is a tool designed to check the axle symmetry between the hub and the wheel rim. First we set an appropriate distance between the slides according to the wheel size. We lean the middle rest against the nave axle and put the frame with slides nearer to the rim so that the slides touch the rim. Then we fix the rest with a screw and check the other side of the wheel. This enables us to see if the nave is centered according to the rim. If the wheel is not centered, it needs to be trued up.

Unior's 1630/4DTPR is used for DT Swiss torx profile nipples. The ergonomic design makes work easy and efficient.

Spoke wrench is used for nipples with dimensions 4.0 and 4.4 mm + 3.3 and 3.45mm. Plastic-coated body enables comfortable tightening and unscrewing of the nipples.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540
• The key body is plastic-coated

Spoke wrench is used for nipples with dimensions 4.0 and 4.4 mm + 3.3 and 3.45mm. Plastic-coated body enables comfortable tightening and unscrewing of the nipples.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540
• The key body is plastic-coated

Shimano Spoke wrench is used for nipples with dimensions 4.3 and 4.4 mm on Shimano¨ Wheel System. Plastic-coated body enables comfortable tightening and unscrewing of the nipples. The length of the wrench is 100 mm, which enables access to the nipples which are mounted on the wheel hub.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540
• The key body is plastic-coated

The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts. Plastic-coated body enables comfortable tightening and unscrewing of the nipples.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540
• The key body is plastic-coated

Unior's 1635/2AP Mavic spoke wrench is used for nipples with a 5.65mm outside diameter found on the new Mavic R-sys wheels. Plastic-coated body enables comfortable tightening and unscrewing.