This wrench is used for nipples with 5 mm and 5.5 mm dimensions. Plastic-coated body enables comfortable tightening and unscrewing of nipples.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540
• The key body is plastic-coated

This wrench fits the popular spoke nipple flat sizes: 3.3 mm, 3.45 mm, 3.7 mm, 3.96 mm, 4.4 mm and 5mm. The shape adjusts perfectly to the hand and allows a comfortable work and easy grip.

• Material: special tool steel
• Drop forged, entirely hardened and tempered

This wrench fits the popular flat spoke sizes.

• Material: polyamide

This easy to use tool enables us to measure spokes dimensions and bearing and crank cotter diameters.

The tool is designed to repair minor damage on brake rotors. It features two different sloth depths to choose from.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540

The vice features two different diameter receptacles of 9 mm and 10 mm for inserting front or rear axles. Fits into jaws of engineers vice. The axle vice is easy to use. Two inserted springs will open the jaws automatically when axle vice is removed from engineers vice.

• Material: special tool steel, hardened and tempered
• Surface finish: chrome plated according to EN12540

This stand for professional use is specially designed for bicycle repair shops. It can be bench-mounted or vise-held.

• The calipers enable simultaneous radial control of the wheel position on both sides, with an additional possibility to control radial symmetry in relation to the hub.
• The geometry of the calipers enables a simultaneous axial control for accurate truing of the rim.
• The calipers have plastic coated tips to prevent scratching the rim.
• The upright arms position can be adjusted with an upright adjustment knob to fit the axle width. The caliper arm position can be adjusted to fit the wheel radius and the caliper tip distance can be adjusted to fit the rim width.
• When changing the wheel, the spring loaded upright arms and the caliper arm can be quickly pulled away, automatically springing back to a set position when inserting a new wheel. This enables faster truing of several same size wheels.
• Truing control of brake rotors can be done with additional calipers inserted into slots in the upright arm.
• Additional holes are useful for storing all the three dimension hubs inserts 1689.3 (12, 15 and 20 mm).
• Additional nuts in the bottom part of the stand enable easy tightening to a workbench.
• Material: special tool steel
• Accepts wheels from 16 to 29 inch with or without tyre.
• Supports hubs up to 157 mm width.
• Truing of 20 mm or other dimension axle wheels requires additional adapters.
• Important: the professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

This stand is intended especially for the enthusiast. It is very easy to use, light (2.3 kg) and does not take up much space. The left bracket is fixed and welded to the lower profile, while the right bracket is flexible to different axle widths.

• The stand can be folded by folding the leg to the lower profile.
• The stand can also be mounted on the work bench with screws to increases stability.
• The control sensor is single sided so first the wheel shall be centered on one side, then turned around and centered on the other side.
• The additional function enables true checking of wheel discs.
• Material: special tool steel
• It is possible to center wheels with dimension from 16 to 29 inch, with or without tyre ( some large 29er tyre may not fit ).
• Supports hubs up to 157 mm width.

The brake caliper is used on the 1689 professional wheel centering stand. It enables the true checking of brake discs.