Busch + Muller USB rear battery light for Y small and Y large. Must be mounted on the flag/light holder

Features:

• Battery powered rear light
• High output LED
• Very bright, large beam angle
• Charged via micro USB port (cable included
• Fits all seat posts
• 53 mm tall
• 31 mm wide
• Weight (incl. battery and mount): 35 g. 
• Integrated lithium battery
• Battery level indicator
• Approved by German road traffic regulations
• Seat post assembly
• Run time: 15 Hours

This light can only be mounted using the Carry Freedom Flag and Light holder.  Fix the holder to the street side of your trailer using the rear hole on the load bed. For trailers manufactured before 2017 you will need to drill a hole using the holder as a template.

SUPERNOVA E3 TAIL LIGHT 2 BACK LIGHT FOR SEATPOST MOUNT, 12V

Technical data:

• 12 V, 0.3 W
• For vertical installation e.g., on a seat post
• Cable length to the front light / battery: 950 mm
• L x W x H: 37 x 11.5 x 30.6 mm, 18 g, IP67
• 5-year warranty

SUPERNOVA E3 TAIL LIGHT 2 BACK LIGHT FOR RACK MOUNT, 12 V

• 12 V, 0.3 W
• 50 mm mounting hole spacing
• Cable length to front light / battery 1,800 mm
• L x W x H: 16 x 61.5 x 11.5 mm, 12 g, IP67
• 5-year warranty

SUPERNOVA M99 TAIL LIGHT BACK LIGHT, 12 V, ECE

This is the first tail light with an integrated brake light and license plate illumination!

These lights are required for gaining official approval for S-Pedelecs.

This new tail light generation integrates everything into a minimalistic, waterproof aluminium housing that can be elegantly integrated with the bike.

Five highly efficient LEDs with Supernova's own Dual Beam technology make the e-bike visible from afar and from all sides.

The brake light lights up with five times the normal brightness and keeps traffic at a distance.

The license plate light has been integrated into the underside of the housing and provides a smooth illumination.

The robust aluminium housing of the M99 Tail Light is waterproof and corrosion resistant.

TWIN BEAM TECHNOLOGY

All Supernova tail lights are equipped with Twin Beam technology.

This highly efficient technology combines two different beam angles, so that you can be seen at any angle from behind, thereby enhancing your safety.

Technical data:

• Waterproof level : IP67
• Weight: 25 g
• L x W x H: 22 x 61.5 x 11.6 mm
• ECE approval: L-class e.g., L1e
• License plate illumination 5° installation angle variability
• Brake light (controlled from M99 front light or from brake levers)
• 0.4 W in standard mode, 0.9 W in brake light mode, 12 V DC
• 2 m cable without connectors including 3M UY connectors

SUPERNOVA M99 TAIL LIGHT BACK LIGHT, 6 V, ECE

This is the first tail light with an integrated brake light and license plate illumination!

These lights are required for gaining official approval for S-Pedelecs.

This new tail light generation integrates everything into a minimalistic, waterproof aluminium housing that can be elegantly integrated with the bike.

Five highly efficient LEDs with Supernova's own Dual Beam technology make the e-bike visible from afar and from all sides.

The brake light lights up with five times the normal brightness and keeps traffic at a distance.

The license plate light has been integrated into the underside of the housing and provides a smooth illumination.

The robust aluminium housing of the M99 Tail Light is waterproof and corrosion resistant.

TWIN BEAM TECHNOLOGY

All Supernova tail lights are equipped with Twin Beam technology.

This highly efficient technology combines two different beam angles, so that you can be seen at any angle from behind, thereby enhancing your safety.

Technical data:

• Waterproof level : IP67
• Weight: 25 g
• L x W x H: 22 x 61.5 x 11.6 mm
• ECE approval: L-class e.g., L1e
• License plate illumination 5° installation angle variability
• Brake light (controlled from M99 front light or from brake levers)
• 0.6 W in standard mode, 1.1 W in brake light mode, 6 V DC
• 2 m cable without connectors including 3M UY connectors

TOPEAK TAILLUX 100 USB

TOPEAK TAILLUX 30 USB

Lazer Rechargeable LED Rear Vent Helmet Light For Gekko Lil'Gekko Lizard

• Genuine Lazer Sport spare
• This LED is designed specifically for the Lizard, Gekko and Lil'Gekko models and fits neatly into the rear vent of the helmet
• Easily removed for charging & security as well as allowing your helmet to be locked up with your bike

• Colour
  Red
• Product Type
  Lighting

• The Mini-Luxo is a classy way to keep yourself seen in low light conditions
• Single LED housed within aluminum outer case
• Main body unscrews from back plate to reveal USB port for recharging
• Lithium-ion polymer rechargeable battery
• Flashing, Constant and Pulse modes
• Push button lens is easy to operate, even with winter gloves
• Supplied with mount
• 15 Lumens output

TOPEAK TAILLUX 25 USB