44 Moto X Pins

Overall length 11mm, thread is M4x0.7x6, strud is 5mm using the provided Wrench to secure.

Moto Pin Wrench included.

44 steel Flippins

16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.

28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.

2mm allen Wrench included.

Standard Pins
Standard length (M4x0.7x8) replacement Pins for DMR V8 or V12 pedals

Terror Pins
Extra long (M4x0.7x10), Chrome plated pedal pins to give claw like grip for DMR V8 and V12 pedals - Wear Pads!

DMR Vault Pedal Axles

Sizes
9/16"

NB:
Axle with the groove and uses the right had thread nut is the left hand (non drive side) axle. This axle tightens into the crank - aniclockwise.

Axle without the groove and uses the left had thread nut is the right hand (drive side) axle. This axle tightens into the crank - clockwise.

Replacement axles for your V8 pedals.

Pair.

Weight: 180grams (Pair).

For bearing size 5/32 loose balls.

NB 
LH (marked) axle LH crank thread RH nut thread.
RH (marked) axle RH crank thread RH nut thread.

Nuts not included. 

Ti Axles

Loose another 80g from your V12’s or Mag V12’s by fitting these Titanium Nitride coated Solid Titanium axles. "Maximum rider weight is not too exceed 185lbs or 85kgs".

Pair - Inc Shields+M7 Nuts

Replacement Axles

Direct replacement for you stock classic V12 axles.

Sizes
9/16"

NB 
LH (marked) axle LH crank thread RH nut thread.
RH (marked) axle RH crank thread LH nut thread.

 

‘V-Lube’ syringe mean easy servicing via the grease port of the V8 pedals.

Filled with gel lubricant.

DMR V8 Pedal Service Kit Includes

2x Plastic End Caps

2x External Shields

2x Internal Seals

52x precision ground 5/32 balls

DMR Vault Pedal Service Kit includes

2x Sealed bearing number: 686ZZ - 6mm Ø ID (Internal Diameter) 13mm Ø OD (Over All Diameter) 5mm Width

2x Plain bearing (bushing) 12mm Ø ID (Internal Diameter) 14mm Ø OD (Over All Diameter) 12mm Width

Nuts:
1x M5x0.75 5 deep right hand thread (left hand pedal) (to be fitted with a 8mm socket)
1x M5x0.75 5 deep left hand thread (right hand pedal) (to be fitted with a 8mm socket)

2x End cap: M14x1x11 

2x Washer: 6mm Ø ID (Internal Diameter) 9mm Ø OD (Over All Diameter) 1mm Width

2x Internal Rubber Seals
 

One Sealed bearing number: 686ZZ - 6mm Ø ID (Internal Diameter) 13mm Ø OD (Over All Diameter) 5mm Width