FIXER SET EXTERNAL FIXER NUT RC1

FIXER SET INTERNAL FIXER NUT RC1

QR Lever Replacement Kit

For DeFender M2 and DeFender XC11 series.

Rubber Shim Replacement Kit

For DeFender M2.

Rubber Strap Replacement Kit

For DeFender R1 and DeFender R2.

Sheldon Fender Nuts.

The Problem Solvers Sheldon Fender Nut was designed to replace the standard brake nut and allow convenient fender (Mudguard) mounting on steel and aluminum road frames and forks.

Product Uses:
Essentially, this is a long brake nut for road forks, as it allows the road brake nut to thread into it for brake mounting. But, it also has threading inside so that a fender (Mudguard) mounting bolt can be threaded into the back of the fork.

The PS Sheldon Fender Nut comes as a set of two sizes: 
10mm for rear mounting and 13mm for front forks. 
or 10mm Rear, 32mm Front
The fender nut will work with all steel and aluminum frames and forks; it also will work with some carbon forks, but check first. It will not work with forks requiring an extended brake nut or a narrow brake nut (such as Reynolds).

Technical details:
* PS Sheldon Fender Nut is a standard 6mm brake nut with longer internal threading and an extension on the back side for a 6mm mounting bolt
* Simply install your brake as you would normally then with a 6mm bolt, mount the fender (Mudguard) to the back side of the nut and to your fork or frame

X-ref QBP Product number: 
B01505 PS Sheldon Fender Nut Set (10mm & 13mm nuts)
 

Sheldon Fender Nuts.

The Problem Solvers Sheldon Fender Nut was designed to replace the standard brake nut and allow convenient fender (Mudguard) mounting on steel and aluminum road frames and forks.

Product Uses:
Essentially, this is a long brake nut for road forks, as it allows the road brake nut to thread into it for brake mounting. But, it also has threading inside so that a fender (Mudguard) mounting bolt can be threaded into the back of the fork.

The PS Sheldon Fender Nut comes as a set of two sizes: 
10mm for rear mounting and 13mm for front forks. 
or 10mm Rear, 32mm Front
The fender nut will work with all steel and aluminum frames and forks; it also will work with some carbon forks, but check first. It will not work with forks requiring an extended brake nut or a narrow brake nut (such as Reynolds).

Technical details:
* PS Sheldon Fender Nut is a standard 6mm brake nut with longer internal threading and an extension on the back side for a 6mm mounting bolt
* Simply install your brake as you would normally then with a 6mm bolt, mount the fender (Mudguard) to the back side of the nut and to your fork or frame

X-ref QBP Product number: 

BO1506 PS Sheldon Fender Nut set (10mm & 32mm nuts)

Brooks Leather Mudflap

1937 design mudflap made from the same leather as the saddles.

• Includes 2x screw bolts to secure it to the mudguard

368mm stays for Dia Compe ENE mudguards

Replacement stays in a longer length.

We have found these are often needed on frames where the mudguard eyelets are situated above rather than behind the wheel axle.

1 Stay per pack

Perfect for adding a touch of extra colour to your ProGuard.

• Durable, high-tack stickers

Durability test with high power jet wash